Kitchen worktop wrapping
Kitchen worktop wrapping changes the look of a worktop by covering it in a durable marble, stone, concrete or wood-effect film. KWrap wraps sound, flat worktops, most often laminate, so a dated top can look like marble or concrete without the cost of templating and fitting a new one.
BeforeCan you wrap kitchen worktops?
Yes, kitchen worktops can be wrapped, as long as the worktop is flat, firm and not swollen. Laminate worktops are the most common candidates because their smooth surface gives the film a strong, even bond. Oiled timber worktops need the oil removed and the surface sealed first, and granite or quartz tops can be wrapped to change their colour, although the original surface is already very hard-wearing.
Is a wrapped worktop heat resistant?
A wrapped worktop is not heatproof. Vinyl film tolerates normal kitchen use, but a hot pan or baking tray placed straight onto the surface can mark, bubble or shrink the film. That is why KWrap recommends trivets or pan stands beside the hob, and why we check the gap between the hob and the worktop edge at the survey.
Knives, water and everyday wear
Treat a wrapped worktop like a good laminate: use a chopping board rather than cutting directly on the surface, wipe up standing water, and clean with a soft cloth and a mild cleaner. The most vulnerable areas are the sink edge and the front edge, so these are where preparation and edge sealing matter most.
Worktop wrap or a new worktop?
Worktop wrapping makes sense when the worktop is sound and you want a different look for less money, or when the cabinets are being wrapped and the worktop should match. A new worktop is the better choice if the existing top is swollen around the sink, badly burned or chipped through to the core, because film cannot repair the board underneath.
Popular worktop finishes
- White veined marble, such as a Carrara effect, which brightens a kitchen and suits most cabinet colours.
- Concrete and stone effects, for an industrial or minimal kitchen.
- Black marble, for contrast against light units.
- Wood effects, to warm up a white or grey kitchen.
Before and after
A real KWrap job, photographed before the film went on and after it was finished. Drag the handle to compare.
What a worktop wrap covers
A worktop wrap covers the top surface and the visible edges, with careful cutting and sealing around everything that sits in or on the worktop.
- Worktop surfaces and front edges
- Upstands and splashback strips where fitted
- Breakfast bars and island tops
- Cutting and sealing around sinks, taps and hobs
- Cleaning, degreasing and filling minor chips
- Joins placed where they are least visible
How KWrap wraps a worktop
- 1
Check the worktop
We check for swelling around the sink, burns and loose edges, and look at how close the hob and oven sit to the surface.
- 2
Prepare
The worktop is cleaned and degreased, and chips are filled and sanded so they do not show through the film.
- 3
Wrap
Film is laid in as few pieces as possible, with any join placed at a corner or beside an appliance.
- 4
Seal and finish
Front edges are heated and wrapped under, and the film is sealed around the sink, tap and hob cut-outs.
Worktop wrapping is a good fit for
- Laminate worktops that are worn, scratched or an outdated colour
- Kitchens where the cabinets are being wrapped and the worktop should match
- Rental kitchens that need a quick, affordable refresh
- Homeowners who want a marble or concrete look without stone prices
A new worktop is the better choice for
- Worktops swollen around the sink, tap or dishwasher
- Tops with burns or chips through to the board underneath
- Busy cooking areas where hot pans regularly go straight onto the surface
What affects the cost of worktop wrapping
Worktop wrapping is quoted on the length and shape of your worktops and the work needed to prepare them.
The quickest way to a price: send a few photos on WhatsApp, any day from 7am to 9pm.
- Length and number of runs
- Longer and L-shaped runs use more film and may need a join.
- Cut-outs
- Each sink, tap and hob cut-out is cut and sealed by hand.
- Condition
- Chips, scorch marks and loose edges need repairing before the film goes on.
- Finish
- Marble, stone and textured wood films vary in price.
Finishes that suit this job
Matt and gloss colours, soft-touch matt, embossed woods, marble, stone, concrete and metal. These are photos of real supplier samples: the code is the supplier's, the colour name is our own description. You choose from the physical samples at your survey.
Carrara marble
MF 3054 · Marble
White veined marble
TG 425 · Marble
Grey marble
MG 446 · Marble
Black marble
HF 5123 · Marble
Concrete
MF 984 · Concrete
Speckled stone
KG 4205 · Stone
Travertine
CF 5529 · Stone
Light oak
CF 5532 · Wood
Why homeowners and businesses choose KWrap
Wrapping is the whole job
KWrap is a vinyl wrapping specialist for kitchens, homes and commercial interiors. Specialism matters because a wrap is judged at its edges and corners, where film has to be heated, stretched and sealed by hand.
Days, not weeks
Most kitchens are wrapped in a day or two, because nothing is ripped out and nothing new has to be made to measure. Your existing units, plumbing and appliances stay exactly where they are.
No rip-out, no mess
Wrapping goes over what you already have, so there is no demolition, no skip on the drive and no weeks of eating takeaways while a kitchen is refitted.
Real samples, in your light
You choose from physical film samples held against your own walls, floor and worktops, because a finish on a phone screen never looks the same as film in your room.
Worktop wrapping: your questions answered
Can you wrap kitchen worktops?
Yes. Kitchen worktops can be wrapped if the worktop is flat, firm and not swollen. Laminate worktops are the most common candidates, because their smooth surface gives the film a strong, even bond.
Is a wrapped worktop heat resistant?
A wrapped worktop is not heatproof. Vinyl film tolerates normal kitchen use, but a hot pan or baking tray placed straight on the surface can mark, bubble or shrink the film, so trivets or pan stands are needed beside the hob.
Can I buy worktop vinyl and fit it myself?
DIY worktop vinyl is sold by home improvement stores and can work on a small, simple worktop. The hard parts are the front edges, corners, joins and sink cut-outs, where film that is not heated and sealed lifts first. Professional architectural film is thicker and fitted with heat.
Can you wrap a worktop with a sink and hob in it?
Yes. The film is cut and sealed around the sink, tap and hob cut-outs. These areas take the most water and heat, so they are prepared and sealed with extra care.
Will I be able to see joins in a wrapped worktop?
Long or L-shaped worktops may need a join, because film comes in rolls of a fixed width. Joins are placed where they are least visible, such as at a corner or beside an appliance.
Related services
Sage grey · SF 1138
Kitchen wrapping
Doors, drawer fronts, panels and worktops re-covered in new film, usually in a day or two.
Read more
Light oak · CF 5532
Kitchen cabinet and cupboard wrapping
A new colour or wood finish on every unit, island and plinth, with the cabinets left in place.
Read more
Navy · SF 1134
Kitchen door wrapping and re-wrapping
Fresh film on tired doors, including vinyl doors that are peeling or lifting.
Read more
Dark ash · SF 1103
Furniture wrapping
Tables, desks, sideboards and shelving given a new surface instead of a trip to the tip.
Read more
Talk to KWrap about your worktops
Call 07904 099566 and send a photo of the worktop, especially around the sink and hob, so we can tell you if it is suitable for wrapping.